廊坊博耐环保科技有限公司

Contact:
+86 18931685668 | bonai@tilefrp.com
Add:
中国河北省廊坊市大城县宫村
 

Customized Size 80*80cm FRP Grating Sheet for Tree Cover Fiber Reinforced Plastic Grating

Fiber reinforced plastic (FRP) is a composite material with advantages such as high strength, lightweight, and corrosion resistance, which is widely used in fields such as architecture, aviation, and automobiles. FRP grid plate, as a structural material, has high stiffness and stability, and can be used to make various support and load-bearing structures. This article will introduce a customized size of 80 * 80cm FRP grating board for covering trees, which has certain practicality and innovation.
1、 Advantages of FRP grating plate
High strength and stiffness: FRP grid panels are made of high-strength glass fiber and resin composites, which have high strength and stiffness and can withstand significant pressure and bending stress.
Lightweight: FRP grating panels are lighter compared to traditional metal materials, making them easy to install and transport.
Corrosion resistance: FRP grating plates have good corrosion resistance and can adapt to various harsh environments, such as acid, alkali, salt spray, etc.
Long service life: FRP grating panels have a longer service life, usually reaching over 20 years, and can maintain their original performance and appearance for a long time.
2、 Customized size 80 * 80cm FRP grating plate design
Size determination: According to actual needs, customize FRP grating panels with a size of 80 * 80cm. This size can meet the needs of covering trees while facilitating production and transportation.
Structural design: In order to improve the load-bearing capacity and stability of FRP grid panels, cross woven glass fiber cloth is used as the reinforcement material, while high-quality resin is used as the matrix. In terms of structural design, a reasonable number of layers and thickness are adopted to ensure the overall performance of the FRP grid plate.
Surface treatment: In order to improve the corrosion resistance and service life of FRP grating plates, a layer of anti-corrosion coating can be applied on the surface. At the same time, in order to meet the requirements of aesthetics and environmental protection, environmentally friendly resin materials can be selected for production.
3、 Production process of FRP grid plate
Raw material preparation: Prepare high-strength fiberglass cloth, resin, fillers, and other raw materials. Among them, glass fiber cloth can be woven manually or mechanically, and the surface is required to be flat and flawless. The resin is made of high-quality epoxy or polyester resin, with moderate viscosity and appropriate curing time required.
Mold production: According to the requirements of the design drawings, create a mold suitable for producing FRP grating plates. The mold should have sufficient strength and stiffness to ensure that the FRP grating plate produced is flat and smooth.
Glass fiber cloth laying: Lay the glass fiber cloth on the mold according to the design requirements, and ensure that the laying is smooth and free of wrinkles. At the same time, manual or mechanical methods can be used to pressurize the glass fiber cloth to improve the reinforcement effect.
Resin injection and curing: Inject resin into the mold in proportion to ensure full penetration of fiberglass cloth. Then, perform curing treatment at appropriate temperature and pressure to fully bond the resin with the fiberglass cloth.
Demolding and cutting: After the FRP grid plate is cured, it is removed from the mold and cut to form the final product. When cutting, the edges should be flat and free of burrs.
Quality testing and packaging: Conduct quality testing on the produced FRP grating panels, including dimensional accuracy, appearance quality, load-bearing capacity, and other indicators. After passing the inspection, packaging should be carried out to prevent damage during transportation.
4、 Installation and Use of FRP Grille Panels
Installation preparation: Before installation, the FRP grating plate should be inspected to ensure that it is flat, smooth, and free from obvious damage and defects. Prepare installation tools and materials at the same time.
Determination of installation position: The installation position of the FRP grating plate can be determined based on actual needs, and can be fixed on the branches of trees or on the ground. When determining the installation location, consideration should be given to the growth of trees and environmental factors to avoid damage to the trees.

X
zh_CNChinese